TM 5-3805-261-23-1
BLADE TIP CYLINDER REPLACEMENT - CONTINUED
0244 00
REMOVAL
CAUTION
Cap hose ends and plug open ports to prevent contamination.
NOTE
Tag hose assemblies before disconnecting to aid in installation.
1.
Disconnect hose assembly (7) from connector (9). Remove and discard preformed packing (8).
2.
Remove connector (9) and preformed packing (10). Discard preformed packing.
3.
Disconnect hose assembly (6) from elbow (1).
4.
Remove elbow (1) and preformed packing (2) from blade tip cylinder (3) assembly. Discard preformed packing.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Blade tip cylinder weighs 50 lb (23 kg).
0244 00-2
