TM 5-3805-261-23-1
PARKING BRAKE AIR CONTROL VALVE MAINTENANCE - CONTINUED
0158 00
ASSEMBLY
WARNING
Use caution when installing parts under spring tension. Wear safety glasses. Uncontrolled release of spring
may cause injury.
1.
Install nut (13) to valve (14).
2.
Install new preformed packing (15), plunger (16), and body (12) in valve (14).
3.
Install new preformed packing (11), stem (10), valve inlet (9), seat (8), spring (7), and supply port (6) on body (12).
INSTALLATION
1.
Install parking brake air control valve assembly (5), boot (4), and nut (3) on control console in operator's compartment.
NOTE
With brake lever in park position, adjust control valve assembly on console to provide 0.03 in. (0.8 mm)
clearance with plate.
2.
Install connector (2).
3.
Connect hose assembly (1).
2
1
4
3
5
397-4251
4.
Install operator's console side panels and gate (WP 0193 00).
END OF WORK PACKAGE
0158 00-3
