TM 5-3805-261-23-1
SUPPLEMENTAL STEERING PUMP WIRING HARNESSES REPLACEMENT - CONTINUED
0145 00
REMOVAL - CONTINUED
9.
Remove bolt (39), washer (38), and clamp (37) from right side of engine.
10.
Remove bolt (40), washer (41), and clamp (42) from right side of engine.
11.
Remove nut (30), washers (28 and 29), and wiring harness (16) from starting motor solenoid (36).
12.
Remove nut (32), washers (33 and 34), wire (31), three wires (35), and wiring harness (5) from starting motor solenoid
(36).
42
40 41
39
38
16
37
28 29 30
31
34 33 32
36
5
35
397-430
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
INSTALLATION
1.
Connect three wires (35), wire (31), and wiring harness (5). Install washers (34 and 33) and nut (32) on starting motor
solenoid (36).
2.
Connect wiring harness (16) and install washers (29 and 28) and nut (30) on starting motor solenoid (36).
3.
Install clamp (42), washer (41), and bolt (40) on right side of engine.
0145 00-4
