TM 5-3805-261-23-1
SUPPLEMENTAL STEERING PUMP WIRING HARNESSES REPLACEMENT - CONTINUED
0145 00
INSTALLATION - CONTINUED
4.
Install clamp (37), washer (38), and bolt (39) on right side of engine.
5.
Install bolt (21), clamp (22), washer (23), and nut (24).
6.
Install wire (16), wiring harness (17), washers (19 and 18), and nut (20) on supplemental steering switch (28).
7.
For Type I machines, install wire (15), wire (14), wire (13), two washers (12), and two nuts (11) to supplemental steer-
ing switch (28).
8.
For CCE and Type II machines, install wire (15), wire (14), two washers (12), and two nuts (11) to supplemental steer-
ing switch (28).
9.
Connect wiring harness (4) and install washers (26 and 25) and nut (27) on supplemental steering switch (28).
10.
Install new tie strap (6).
11.
Install wiring harness (5), washers (9 and 8), and nut (10) on supplemental steering pump (7).
12.
Install wiring harness (4), washers (3 and 2), and nut (1) on supplemental steering pump (7).
12 3
4
5
6
17
11 12
10
13 15 18
9 8
19
14
20
16
28
7
27
26 25
4
21
397-428
24 23
22
13.
Connect battery cables (WP 0125 00).
END OF WORK PACKAGE
0145 00-5
