TM 5-3805-261-23-1
SUPPLEMENTAL STEERING PUMP WIRING HARNESSES REPLACEMENT - CONTINUED
0145 00
REMOVAL
NOTE
Tag all wiring harnesses before disconnecting to aid in installation.
1.
Remove nut (1) and washers (2 and 3) and disconnect wiring harness (4) from supplemental steering pump (7).
2.
Remove nut (10) and washers (8 and 9) and disconnect wiring harness (5) from supplemental steering pump (7).
3.
Remove and discard tie strap (6).
4.
Remove nut (27), washers (25 and 26), and wiring harness (4) from supplemental steering switch (28).
NOTE
The Type I machine has an additional wire connected to the supplemental steering switch.
5.
For Type I machines, remove two nuts (11), two washers (12), wire (13), wire (14), and wire (15) from supplemental
steering switch (28).
6.
For CCE and Type II machines, remove two nuts (11), two washers (12), wire (14), and wire (15) from supplemental
steering switch (28).
7.
Remove nut (20), washers (18 and 19), wire (16), and disconnect wiring harness (17) from supplemental steering switch
(28).
8.
Remove nut (24), washer (23), clamp (22), and bolt (21).
0145 00-2
