TM 5-3805-261-23-1
LEFT- AND RIGHT-HAND BLADE FLOAT HARNESSES
REPLACEMENT (CCE MACHINE) - CONTINUED
0144 00
REMOVAL - CONTINUED
2.
Loosen but do not remove two screws (5).
NOTE
Tag wiring harnesses before disconnecting to aid in installation.
3.
Disconnect blade float wiring harness (7) from two screws (5).
4.
Detach clip (6) from wiring harness (7) and main wiring harness under left side of cab.
5.
Remove wiring harness (7) from main wiring harness.
6.
Remove clip (6) and grommet (8) from wiring harness (7).
5
6
7
8
397-427
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
INSTALLATION
1.
Install grommet (8) and clip (6) on wiring harness (7).
2.
Connect wiring harness (7) to main wiring harness under left side of cab.
3.
Attach clip (6) on wiring harness (7) and main wiring harness.
4.
Install wiring harness (7) to two screws (5).
5.
Tighten two screws (5).
0144 00-2
