TM 5-3805-261-23-1
DISCONNECT SWITCH CABLE REPLACEMENT - CONTINUED
0142 00
INSTALLATION - CONTINUED
7.
Position cable (3) between two clamps (13).
8.
Install two clamps (13) and plate (12).
9.
Install clip (9) on hose.
10.
Install two washers (10) and nuts (11) on bracket (14).
9
10
11
14
13
12
397-423
11.
Position cable (3) through rear frame, under engine
and across to right side of engine.
12.
Install two clips (5) on cable (3) on inner-right-rear
frame.
13.
Install two washers (6) and bolts (7).
1
14.
Install two new tie straps (4).
15.
Install cable (3), new lockwasher (2), and nut (1) on
starting motor (8).
8
2
3
7
5
4
6
4
397-2145
16.
Install left and right side plates on operator panel console (WP 0193 00).
17.
Connect battery cables (WP 0125 00).
END OF WORK PACKAGE
0142 00-5
