TM 5-3805-261-23-1
FRONT TURN SIGNAL LIGHTS MAINTENANCE - CONTINUED
0107 00
REMOVAL
1.
Disconnect wire assembly (6) and remove grommet (8).
2.
Remove nut (9), lockwasher (10), washer (11), and turn signal light (13). Discard lockwasher.
3.
Remove two washers (12) from turn signal light (13).
DISASSEMBLY
Remove three screws (5), lens (4), gasket (3), lamp (2), and quick-disconnect terminal (7). Discard gasket and quick-dis-
connect terminal.
5
5
13
13
4
4
3
2
3
7
2
11
8
6
6
7
12
8
12
10
11
10
9
9
SECTIONALIZED
NON-SECTIONALIZED
394-327
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
ASSEMBLY
Install new quick-disconnect terminal (7), lamp (2), new gasket (3), lens (4), and three screws (5).
INSTALLATION
1.
Install two washers (12) on turn signal light (13).
2.
Install turn signal light (13), washer (11), new lockwasher (10), and nut (9).
3.
Install grommet (8) and connect wire assembly (6).
4.
Connect battery cables (WP 0125 00).
END OF WORK PACKAGE
0107 00-3
