TM 5-3805-261-23-1
REAR TURN SIGNAL LIGHTS, STOPLIGHTS, AND MOUNTING MAINTENANCE - CONTINUED
0108 00
LAMP REPLACEMENT - CONTINUED
Stoplight Lamp
NOTE
Gasket is attached to lens.
1.
Remove three tapping screws (4), lockwashers (3), red lens (2), and gasket (1) assembly. Discard tapping screws and
lockwashers. Discard lens and gasket assembly if lens is cracked or gasket is deteriorated.
2.
Remove and discard lamp (5) by pushing in and turning left.
3.
Install new lamp (5) by pushing in and turning right.
4.
Install new red lens (2) and gasket (1) assembly if discarded, three new lockwashers (3) and new tapping screws (4).
1
2
3
4
5
397-328
0108 00-2