TM 5-3805-261-23-1
FRONT BLACKOUT DRIVE LIGHT MAINTENANCE
THIS WORK PACKAGE COVERS
Lamp Replacement, Removal, Disassembly, Cleaning and Inspection, Assembly, Installation
INITIAL SETUP
Maintenance Level
References
Unit
Tools and Special Tools
Equipment Conditions
Tool kit, general mechanic's (Item 89, WP 0348 00)
Machine parked on level ground (TM 5-3805-261-
10)
Materials/Parts
Parking/emergency brake applied (TM 5-3805-261-
Rag, wiping (Item 35, WP 0349 00)
10)
Tag, marker (Item 44, WP 0349 00)
Implements lowered to ground (TM 5-3805-261-
10)
Cable tie (2)
Engine off (TM 5-3805-261-10)
Gasket (2)
Lockwasher (2)
Battery cables disconnected (WP 0125 00)
LAMP REPLACEMENT
NOTE
Three screws cannot be removed from door.
1.
Loosen three screws (5) and remove door (4) from housing (1).
2.
Remove and discard gasket (3).
3.
Remove and discard lamp (2) by pushing in and turning left.
4.
Install new lamp (2) by pushing in and turning right.
5.
Install new gasket (3).
6.
Position door (4) on housing (1) and tighten three screws (5).
1
2
3
4
5
397-2088
