TM 5-3805-261-23-1
REAR TURN SIGNAL LIGHTS, STOPLIGHTS, AND MOUNTING MAINTENANCE - CONTINUED
0108 00
LAMP REPLACEMENT - CONTINUED
Rear Turn Signal Lamp
NOTE
Gasket is attached to lens.
1.
Remove three tapping screws (9), lockwashers (8), amber lens (7), and gasket (6) assembly. Discard tapping screws and
lockwashers. Discard lens and gasket assembly if lens is cracked or gasket is deteriorated.
2.
Remove and discard lamp (10) by pushing in and turning to left.
3.
Install new lamp (10) by pushing in and turning to right.
4.
Install new amber lens (7) and gasket (6) assembly if discarded, three new lockwashers (8) and new tapping screws (9).
6
7
8
9
10
397-2089
REMOVAL
Stoplight
NOTE
Gasket is attached to lens.
1.
Remove three tapping screws (4), lockwashers (3), red lens (2), and gasket (1) assembly. Discard tapping screws and
lockwashers. Discard lens and gasket assembly if lens is cracked or gasket is deteriorated.
2.
Remove lamp (5) by pushing in and turning to left.
0108 00-3
