TM 5-3805-261-23-1
START SWITCH REPLACEMENT - CONTINUED
0079 00
REMOVAL
1.
Remove screw (1), knob (2), nut (3), washer (4), and switch (9) from of operator panel console (5).
NOTE
Tag wire assemblies before disconnecting to aid in installation.
2.
Remove three screws (7) and washers (6) and disconnect three wire assemblies (8) from switch (9).
1
2
3
4
5
9
8
6
6
7
7
8
397-255
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
INSTALLATION
1.
Connect three wire assemblies (8) and install three washers (6) and screws (7) on switch (9).
2.
Install switch (9), washer (4), nut (3), knob (2), and screw (1) on operator panel console (5).
3.
Install left and right side plates on operator panel console (WP 0193 00).
4.
Connect battery cables (WP 0125 00).
END OF WORK PACKAGE
0079 00-2
