TM 5-3805-261-23-1
BATTERY DISCONNECT SWITCH REPLACEMENT - CONTINUED
0081 00
REMOVAL
NOTE
Tag wire assemblies before disconnecting to aid in installation.
1.
Remove two nuts (1), washers (2) and disconnect two wire assemblies (9) and two cables (10) from switch (8).
2.
Remove nut (5), key (6), washer (4), plate (3), and switch (8) from left side plate (7) of operator panel console.
6
5
4
3
7
2
1
8
10
9
397-2061
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
INSTALLATION
1.
Install switch (8), plate (3), washer (4), and nut (5) on left side plate (7) of operator panel console.
2.
Connect two wire assemblies (9) two cables (10) and install two washers (2) and nuts (1) on switch (8).
3.
Install left and right side plates to operator panel console (WP 0193 00).
4.
Connect battery cables (WP 0125 00).
END OF WORK PACKAGE
0081 00-2
