TM 5-3805-261-23-1
ETHER CONTROL SWITCH REPLACEMENT - CONTINUED
0077 00
REMOVAL
1.
Remove screw (1), lockwasher (2), and push button (3). Discard Lockwasher.
2.
Remove nut (4), lockwasher (5), and switch (7) from operator panel console (6). Discard lockwasher.
3.
Remove nut (11) from switch (7).
NOTE
Tag wire assemblies before disconnecting to aid in installation.
4.
Disconnect two wire assemblies (9) from terminals (8).
5.
Remove two screws (10) and terminals (8) from switch (7).
2
1
3
4
5
6
11
7
8
8
9
9
10
397-248
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
INSTALLATION
1.
Install two terminals (8) and screws (10) on switch (7).
2.
Connect two wire assemblies (9) to terminals (8).
3.
Install nut (11) on switch (7).
4.
Install switch (7), new lockwasher (5), and nut (4) on operator panel console (6).
5.
Install push button (3), new lockwasher (2), and screw (1).
6.
Install left and right side plates to operator panel console (WP 0193 00).
7.
Connect battery cables (WP 0125 00).
END OF WORK PACKAGE
0077 00-2
