TM 5-3805-261-23-1
MAIN CIRCUIT BREAKER REPLACEMENT - CONTINUED
0080 00
REMOVAL
NOTE
Tag wire assemblies before disconnecting to aid in installation.
1.
Remove two nuts (1), lockwashers (2), and disconnect three wire assemblies (7) from main circuit breaker (4). Discard
lockwashers.
2.
Remove two nuts (3), screws (5), and main circuit breaker (4) from left side plate (6) of operator panel console.
5
3 4
6
2
1
7
397-2060
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
INSTALLATION
1.
Install main circuit breaker (4), two screws (5), and nuts (3) on left side plate (6) of operator panel console.
2.
Connect three wire assemblies (7) and install new lockwashers (2) and nuts (1) on main circuit breaker (4).
3.
Install left side plate to operator panel console (WP 0193 00).
4.
Connect battery cables (WP 0125 00).
END OF WORK PACKAGE
0080 00-2
