TM 5-3805-261-23-1
WORK LIGHT SWITCHES REPLACEMENT - CONTINUED
0076 00
REMOVAL
NOTE
This procedure covers replacement of the rear work light switch. Follow these instructions for the front work
light switch.
1.
Remove knurled nut (1) and switch (3) from operator panel console (2).
2.
Remove nut (8) from switch (3).
NOTE
Tag wire assemblies before disconnecting to aid in installation.
3.
Disconnect two wire assemblies (5) from terminals (4).
4.
Remove two screws (6), lockwashers (7), and terminals (4) from switch (3). Discard lockwashers.
1
2
8
3
4
4
7
5
5
6
397-247
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0021 00.
INSTALLATION
1.
Install two terminals (4), new lockwashers (7), and screws (6) on switch (3).
2.
Connect two wire assemblies (5) to terminals (4).
3.
Install nut (8) on switch (3).
4.
Install switch (3) and knurled nut (1) in operator panel console (2).
5.
Install left and right side plates to operator panel console (WP 0193 00).
6.
Connect battery cables (WP 0125 00).
END OF WORK PACKAGE
0076 00-2
