TM 5-3805-261-23-1
PRIMARY FUEL FILTER/PRIMING PUMP AND MOUNTING MAINTENANCE
(MODELS 130G, 130GSCE, AND 130GNSCE) - CONTINUED
0045 00
INSTALLATION
1.
Install adapter (15), two preformed packings (14), and elbow (13).
2.
Install primary fuel filter/priming pump (4), two washers (1), and bolts (2).
3.
Connect hose assembly (12).
4.
Install valve (5), new preformed packing (6), connector (7), and elbow (8).
5.
Connect hose assembly (9).
6.
Install body (10) on primary fuel filter/priming pump (4).
7.
Tighten nut (3) to 18 lb-ft (24 Nm).
8.
Turn valve (11), in front-lower-right of fuel tank, to the left to open.
2
1
3
4
56
15 14
7
8
14
13
9
10
12
397-135
11
397-143
9.
Bleed air from fuel line system (WP 0035 00).
10.
Turn battery disconnect switch to ON position and start engine (TM 5-3805-261-10).
11.
Check for leaks. Stop engine.
12.
Close right side engine door (TM 5-3805-261-10).
END OF WORK PACKAGE
0045 00-5
