TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont.)
15-11.
Blade Tip Check and Relief Valve. (Sheet 4 of 4)
INSTALLATION (cont.)
9.
Operate blade tip control lever. Move
system through at least five full movements
of travel to bleed air from system.
10.
Stop engine.
11.
Inspect hose assemblies and connections
for leaks.
12.
Refill hydraulic tank to proper level. Refer to
LO 5-3805-261-12.
13.
Install frame cover (4), nine washers (3 and
2) and bolts (1, Figure 15-14).
NOTE
Return
13OG
Grader
to
original
equipment condition.
Figure 15-14.
End of Task
15-36
