TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont.)
15-12.
Scarifier Check and Relief Valve. (Sheet 2 of 5)
REMOVAL
NOTE
All hose and tube assemblies must be
tagged before disconnecting to aid in
installation. Cap all hose and tube
ends to prevent contamination.
1.
Disconnect hose assembly (1, Figure 15-16)
under right side of front frame.
2.
Remove elbow (2) and preformed packing
(3). Discard preformed packing (3).
3.
Disconnect hose assembly (4).
4.
Remove elbow (5) and preformed packing
(6). Discard preformed packing (6).
5.
Disconnect hose assembly (7).
6.
Remove
connector
(8)
and
preformed
packing (9). Discard preformed packing (9).
7.
Disconnect hose assembly (10).
8.
Remove connector (11) and preformed
packing (12). Discard preformed packing
(12).
9.
Remove three bolts (13), washers (14) and
valve assembly (15, Figure 15-17).
Figure 15-16.
Figure 15-17.
Go to Sheet 3
15-38
