TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE.
15-11.
Blade Tip Check and Relief Valve. (Sheet 3 of 4)
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install valve assembly (19), washer (18) and
bolt (17, Figure 15-15).
2.
Install new preformed packing (16) and
connector (15).
3.
Install new preformed packing (14) and
connector (13).
4.
Connect hose assemblies (12 and 11).
5.
Install new preformed packing (10) and
elbow (9, Figure 15-14).
6.
Install new preformed packing (8) and elbow
(7).
7.
Connect hose assemblies (6 and 5).
WARNING
Only a qualified operator may perform
the
next
procedure.
All
other
personnel must clear the immediate
area. Failure to follow this procedure
may cause INJURY. If you are
injured, seek medical aid immediately.
8.
Start engine. Refer to TM 5-38055-261-10.
Go to Sheet 4
15-35
