TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-10.
Sideshift Check and Relief Valve. (Sheet 4 of 4)
INSTALLATION (cont.)
WARNING
Only a qualified operator may perform
the
next
procedure.
All
other
personnel must clear the immediate
area. Failure to follow this procedure
may cause INJURY. If you are
injured, seek medical aid immediately.
8.
Start engine. Refer to TM 5-3805-261-10.
9.
Operate sideshift control lever. Move
system through at least five full movements
of travel to bleed air from system.
10.
Stop engine.
11.
Inspect hose assemblies and connections
for leaks.
12.
Refill hydraulic tank to proper level. Refer to
LO 5-3805-261-12.
13.
Install frame cover (4), eight washers (3 and
2) and bolts (1, Figure 15-12).
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 15-12.
End of Task
15-32
