TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE.
15-6.
Blade Float Check Valve. (Sheet 3 of 3)
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install blade float check valve (15, Figure
15-5).
2.
Install three washers (14) and bolts (13).
3.
Install new preformed packing (12) and
connector (11, Figure 15-4).
4.
Connect hose assembly (10).
5.
Install new preformed packing (9) and
connector (8).
6.
Connect hose assembly (7).
7.
Install new preformed packing (6) and
elbow (5).
8.
Connect hose assembly (4).
9.
Install new preformed packing (3) and
elbow (2).
10.
Connect hose assembly (1).
NOTE
Return
130G
Grader
to
original
equipment condition.
End of Task
15-17
