TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-5.
Blade Float Pilot Valve. (Sheet 4 of 4)
INSTALLATION (cont)
WARNING
Only
a
qualified
operator
may
perform the next procedure. All other
personnel must clear the immediate
area. Failure to follow this procedure
may cause INJURY. If you are
injured,
seek
medical
aid
immediately.
12.
Start engine. Refer to TM 5-3805-261-10.
13.
Operate blade float control. Move system
through at least five full movements to
bleed air from hydraulic system.
14.
Inspect all hose assemblies for leaks.
15.
Stop engine.
16.
Refill hydraulic tank to proper level. Refer
to LO 5-3805-261-12.
NOTE
Return
13OG
Grader
to
original
equipment condition.
End of Task
15-14
