TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-5.
Blade Float Pilot Valve. (Sheet 2 of 4)
REMOVAL
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends to prevent contamination.
1.
Disconnect hose assembly (1) from elbow
(13, Figure 15-2).
2.
Disconnect hose assembly (2) from tee
(14).
3.
Disconnect hose assembly (3).
4.
Disconnect hose assembly (4).
5.
Remove bolt (5) and washer (6).
6.
Remove items 7 thru 16 as an assembly.
7.
Remove coils (7 and 8) from pilot valve (16,
Figure 15-3).
8.
Remove connector (9) and preformed
packing (10). Discard preformed packing
(10).
9.
Remove connector (11) and preformed
packing (12). Discard preformed packing
(12).
10.
Remove elbow (13).
11.
Remove tee (14) and preformed packing
(15). Discard preformed packing (15).
Figure 15-2.
Figure 15-3.
Go to Sheet 3
15-12