TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-7.
Hydraulic Pump Relief Valve Assembly and Mounting. (Sheet 3 of 3)
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install three washers (14), grommets (13),
plate (12), washers (11 and 10) and three
bolts (9, Figure 15-7).
2.
Install items 33 thru 15 as an assembly, two
washers (8) and bolts (7, Figure 15-6) to
vehicle.
3.
Connect hose assembly (6).
4.
Connect hose assembly (5).
5.
Connect hose assembly (4).
6.
Connect hose assembly (3).
7.
Connect hose assembly (2).
8.
Connect hose assembly (1).
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 15-6.
End of Task
Figure 15-7.
15-20
