TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE.
15-5.
Blade Float Pilot Valve. (Sheet 3 of 4)
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install new preformed packing (15) and tee
(14) into pilot valve (16, Figure 15-3).
2.
Install elbow (13).
3.
Install new preformed packing (12) and
connector (11).
4.
Install new preformed packing (10) and
connector (9).
5.
Install coils (8 and 7).
6.
Position items 16 thru 7 as an assembly
(Figure 15-2) on vehicle.
7.
Install washer (6) and bolt (5).
8.
Connect hose assembly (4) to connector
(9).
9.
Connect hose assembly (3) to connector
(11).
10.
Connect hose assembly (2) to tee (14).
11.
Connect hose assembly (1) to elbow (13).
Go to Sheet 4
15-13
