TM 5-3805-261-20
BODY, CHASSIS AND HULL ACCESSORY ITEMS MAINTENANCE.
14-7.
Windshield Washer. (Sheet 3 of 4)
REMOVAL
8.
Remove three screws (14), washers (15)
and six clips (16, Figure 14-16).
9.
Remove two hoses (17).
10.
Remove upper nozzle assembly (18), lower
nozzle assembly (19), two screws (20),
bracket (21) and gasket (22) from exterior,
center of cab. Discard gasket (22).
Remove all gasket material from mounting
surfaces.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
CAUTION
Be sure that the parking brake lever
enters the notch in the housing when
the transmission is put into position
in the transmission case.
1.
Install new gasket (22), bracket (21), two
screws (20), lower nozzle assembly (19)
and upper nozzle assembly (18, Figure 14-
16) in exterior, center of cab.
2.
Install two hoses (17) in interior, right front
of cab.
3.
Install six clips (16), three washers (15) and
screws (14).
Figure 14-16.
Go to Sheet 4
14-25
