REMOVAL - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
871

TM 5-3805-261-20 BODY, CHASSIS AND HULL ACCESSORY ITEMS MAINTENANCE. (cont) 14-7. Windshield Washer. (Sheet 1 of 2) REMOVAL NOTE All wire, cable and harness assemblies must be tagged before disconnecting to aid in installation. 1. Disconnect four wire assemblies (1, Figure 14-14) from interior, right side of cab. NOTE All hose and tube assemblies must be tagged before disconnecting to aid in installation. Cap all hose and tube ends to prevent contamination. 2. Disconnect two hoses (17). 3. Remove eight screws (2) and two pump assemblies (3). 4. Remove two nozzles (4), strainers (5) and hoses (6) from pump assemblies (3). 5. Remove cover (7), reservoir (8) and pad (9) from vehicle. 6. Remove two screws (10) and cover (11, Figure 14-15) from interior, right front of cab. NOTE Open bottom right window to aid in removal procedures. 7. Remove four screws (12) and panel (13). Figure 14-14. Figure 14-15. Go to Sheet 3 14-24

Privacy Statement
Press Release
Contact