TM 5-3805-261-20
BODY, CAB, HOOD AND HULL MAINTENANCE. (cont)
13-15.
Operator’s Panel Console. (Sheet 6 of 6)
INSTALLATION (cont)
17.
Install bracket (10), four washers (9) and
bolts (8, Figure 13-52).
18.
Connect harness assembly (7) to harness
assembly (6).
19.
Install harness assembly (6) onto bracket
(10).
20.
Install four washers (5) and bolts (4).
21.
Install clevis pin (2) and new cotter pin (1).
Install clevis pin (2) through linkage rod (3)
and lever (20).
22.
Install seat. Refer to paragraph 13-21,
steps 7 and 8.
NOTE
Return
130C
Grader
to
original
equipment condition.
Figure 13-52.
End of Task
13-60
