TM 5-3805-261-20
BODY, CAB, HOOD AND HULL MAINTENANCE. (cont)
13-16.
Cab Insulation and Mounting. (Sheet 2 of 3)
REMOVAL
NOTE
The
following
is
a
maintenance
procedure for the left cover. The
maintenance procedure for the right
cover is identical.
1.
Remove three screws (1), washers (2),
cover (3) and seal (4, Figure 13-56) on floor
in interior of cab.
2.
Remove two bolts (5) and bracket (6).
3.
Remove three nuts (7), bolts (8), washers
(9), plate (10) and seal (11).
4.
Remove two bolts (12), washers(13) and
plate (14).
5.
Remove seal (15) by pulling out through top
of floormat (16, Figure 13-57).
6.
Remove floormat (16).
7.
Remove nut (17), washer (18) and bushing
(19) from floor of cab.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 13-56.
Figure 13-57.
Go to Sheet 3
13-62
