TM 5-3805-261-20
BODY, CAB, HOOD AND HULL MAINTENANCE.
13-17.
Gage Panel Vandalism Guard. Sheet 2 of 3)
REMOVAL
1.
Remove two rivets (1) and plate (2, Figure
13-58) from front right, outside of engine
compartment.
2.
Remove cover (3).
3.
Remove two rivets (4), handle (5) and plate
(6) from cover (3).
4.
Remove ten rivets (7), two plates (8) and
strips (9).
5.
Remove three rivets (10) and plate (11).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 13-58.
Go to Sheet 3
13-65
