TM 5-3805-216-20BODY, CAB, HOOD AND HULL MAINTENANCE.13-15. Operator’sPanelConsole. (Sheet 3 of 6)REMOVAL10.Remove four bolts (23) and washers (24,Figure 13-54) from left side of operator’spanel console.11.Remove nut (25), washer (26) and plate(27) from master disconnect switch (28).12.Remove two screws (29) and nuts (30) frommain circuit breaker (31).13.Disconnect harness assembly (32) fromharness assembly (33).14.Separate harness assemblies (6 and 32)and grommet (34) from panel (38).Separate by pushing grommet (34) throughopening along with harness assemblies (6and 32).15.Remove bolt (35), washer (36) and clip (37,Figure 13-55).16.Remove panel (38).17.Remove two nuts (39), washers (40) andbolts (41) from top of operator’s panelconsole.18.Remove bolt (42) and washer (43).19.Remove two bolts (44) and washers (45).20.Remove handle (46) and gate (47). Turnhandle (46) counterclockwise.21.Remove two bolts (48), washers (49) andbracket (50).Figure 13-54.Figure 13-55.Go to Sheet 413-57
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business