TM 5-3805-261-20
BODY, CAB, HOOD AND HULL MAINTENANCE.
13-12.
Cab Sound Suppression Panels (Lower Front and Rear). (sheet 2 of 3)
REMOVAL
1.
Using an offset screwdriver, remove four
screws (1) and covers (2 and 3, Figure 13-
48) in front, inside of cab.
2.
Remove four screws (4) and panel (5).
3.
Remove three screws (6), washers (7) and
insulation (8, Figure 13-49) from rear, inside
of cab.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Go to Sheet 3
Figure 13-48.
Figure 13-49.
13-49
