INSTALLATION (cont) - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
787

TM 5-3805-261-20 BODY, CAB, HOOD AND HULL MAINTENANCE. (cont) 13-8. Lower Front Windshields. (Sheet 7 of 7) INSTALLATION (cont) WARNING Use adequate hoist and sling to perform this task. Failure to do so could result in INJURY. If you are injured, seek medical aid immediately. 7. Attach hoist and sling to items 17 thru 29 as an assembly (Figure 13-24). 8. Insert pivot (20) into housing (9). 9. Install housing (9) and two bolts (8). 10. Remove hoist and sling. 11. Install bearing (7) and washer (6) into housing (5, Figure (13-23). 12. Install housing (5) and four bolts (4). 13. Install bolt (3) only halfway. 14. Install one of two spacers (2) under lip, inside of cab. Line up with bolt (3) and push bolt (3) through one of two spacers (2) and cab panel. 13. Install one of two spacers (2) and handle (1). Turn handle (1) clockwise to install. NOTE Return 130G Grader to original equipment condition. Figure 13-24. Figure 13-23. End of Task 13-30

Privacy Statement
Press Release
Contact