TM 5-3805-261-20
BODY, CAB, HOOD AND HULL MAINTENANCE.
13-8.
Lower Front Windshields. (Sheet 6 of 7)
INSTALLATION
1.
Install stop (16) and two bolts (15) in outer
window frame (13-25).
2.
Install new gasket (14) with adhesive
backing onto mounting surface of outer
window frame (13). Surface must be clean
and dry. Cut bulk gasket material to size
and
remove
gasket
material
from
all
mounting holes.
3.
Install seal (12). Seat lips of seal (12) into
grooves of outer window frame (13), work
seal (12) around outer window frame (13)
until ends meet. If installing new seal (12)
cut bulk seal material to size.
4.
Position outer window frame (13) against
cab wall in left front, inside of cab.
5.
Install 13 bolts (11). Move outer window
frame (13) to align holes.
6.
Install bearing (10) into housing (9).
Figure 13-25.
Go to Sheet 7
13-29
