ASSEMBLY - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
785

TM 5-3805-261-20 BODY, CAB, HOOD AND HULL MAINTENANCE. (cont) 13-8. Lower Front Windshields. (Sheet 5 of 7) ASSEMBLY 1. Install 34 screw inserts (30) in inner and outer window frames (13 and 29, Figure 13- 27) if necessary, tap in with soft faced hammer. 2. Install new gasket (28) in inner window frame (29) with adhesive backing onto lip of inner window frame. Surface must be clean and dry. Cut bulk gasket material to size. 3. Install glass (27) and seal (26). Seat lip of seal (26) between glass (27) and inner window frame (29), work lip of seal (26) around inner window frame (29) until ends meet and glass (27) is secured in inner window frame (29). If installing new seal (26), cut bulk seal material to size. 4. Install two bolts (25, Figure (13-26). 5. Install latch (24) and two screws (23). 6. Install handle (22) and two bolts (21). 7. Install pivot (20) and three bolts (19). 8 Install pivot (18) and four bolts (17). Figure 13-27. Figure 13-26. Go to Sheet 6 13-28

Privacy Statement
Press Release
Contact