TM 5-3805-261-20
WIRING HARNESS MAINTENANCE.
7-134.
Heater Wiring Harness. (Sheet 2 of 3)
REMOVAL
1.
Remove seat. Refer to paragraph 13-21,
steps 1 and 2.
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
2.
Disconnect heater wiring harness (4, Figure
7-221) from main wiring harness.
3.
Disconnect heater wiring harness (4) from
heater lead.
4.
Remove bolt (1), lockwasher (2) and
washer (3).
5.
Remove heater wiring harness (4).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-221
Go to Sheet 3
7-351