TM 5-3805-261-20
WIRING HARNESS MAINTENANCE. (cont)
7-119.
Starting Motor Lead. (Sheet 3 of 3)
INSTALLATION
1.
Position wire assembly (5, Figure 7-201) on
starting motor.
2.
Install washer (4) and nut (3). Tighten nut
(4) to 22 ft-lb torque.
3.
Position lockwasher (2) and wire assembly
(5) on fuel injection mounting support.
4.
Install bolt (1).
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 7-201
End of Task
7-312
