TM 5-3805-261-20
LIGHT SYSTEM MAINTENANCE. (cont)
7-85.
Blackout Stop and Taillights. (Sheet 3 of 4)
DISASSEMBLY
1.
Remove six screws (8), door (9) and
gasket (10, Figure 7-129). Discard
gasket (10). Remove all gasket
material from mounting surfaces.
2.
Remove two lamps (11).
3.
Remove two screws (12), washers
(13) and socket (14, Figure 7-130).
4.
Remove three screws (15), two plates
(16) and six rings (17) from body (18).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
ASSEMBLY
1.
Install six rings (17), two plates (16)
and three screws (15) in body (18,
Figure 7-130).
2.
Install socket (14), two washers (13)
and screws (12).
3.
Install two lamps (11, Figure 7-129).
4.
Install new gasket (10), door (9) and
six screws (8).
Figure 7-130
Figure 7-129
Go to Sheet 4
7-208