TM 5-3805-261-20
LIGHT SYSTEM MAINTENANCE. (coot)
7-84.
Vehicle Rear Signal Lights. (Sheet 3 of 4)
REMOVAL (cont)
7.
Remove three screws (9), amber lens (10)
and gasket (11, Figure 7-125). Discard
gasket (11). Remove all gasket material
from mounting surfaces.
8.
Remove lamp (12). Depress, turn and
withdraw.
9.
Remove three screws (13) and lockwashers
(14).
10.
Withdraw housing (16) from bracket (24).
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
11.
Disconnect wire assembly (15) from wiring
harness connector and from clip (21).
12.
Remove housing (16).
13.
Remove bolt (17), washer (18), nut (19) and
clips (20 and 21, Figure 7-126).
14.
Remove two bolts (22), washers (23) and
bracket (24).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-125
Figure 7-126
Go to Sheet 4
7-204
