TM 5-3805-261-20
LIGHT SYSTEM MAINTENANCE.
7-84.
Vehicle Rear Signal Lights. (Sheet 2 of 4)
REMOVAL
NOTE
The
following
is
a
maintenance
procedure for the rear, right signal
light. The maintenance procedure for
the rear, left signal light is identical.
1.
Remove three screws (1), red lens (2) and
gasket (3, Figure 7-124). Discard gasket
(3). Remove all gasket material from
mounting surfaces.
2.
Remove lamp (4). Depress, turn and
withdraw.
3.
Remove three screws (5) and lockwashers
(6).
4.
Withdraw housing (8) from bracket (24).
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
5.
Disconnect wire assembly (7) from wiring
harness connector and remove from clip
(20).
6.
Remove housing (8).
Figure 7-124
Go to Sheet 3
7-203
