TM 5-3805-261-20
LIGHT SYSTEM MAINTENANCE.
7-86.
Rear Floodlight. (Sheet 2 of 3)
REMOVAL
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
1.
Remove screw (1) to disconnect wire
assembly (2) from items 3 thru 14 as an
assembly (Figure 7-131).
2.
Remove nut (3), lockwasher (4) and spacer
(5, Figure 7-132).
3.
Remove spacer (6) and items 10 thru 14 as
an assembly.
4.
Remove two bolts (7), lockwashers (8) and
bracket (9, Figure 7-133).
DISASSEMBLY
1.
Remove two screws (10), clamps (11) and
ring (12) from body (14, Figure 7-133).
2.
Remove lamp (13).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-131
Figure 7-132
Figure 7-133
7-211
