TM 5-3805-261-20
LIGHT SYSTEM MAINTENANCE. (cont)
7-82.
Front Blackout Light. (Sheet 4 of 4)
INSTALLATION
1.
Install two U-bolts (8), brackets (7), four
washers (6) and nuts (5) loosely on tube (9,
Figure 7-118).
2.
Position items 9 thru 5 as an assembly
(Figure 7-119) on top of front frame.
3.
Slide two brackets (7) under lips of front
frame and aline the rounded end of tube (9)
flush with right edge of frame.
4.
Tighten four nuts (5).
5.
Position items 17 thru 10 as an assembly.
Must be in straight level position.
6.
Install wire assembly (4, Figure 7-115) at
connector to body assembly (17).
7.
Connect wire assembly (4) at terminal to
tube (9).
8.
Install lockwasher (3) and nut (2).
9.
Install two new straps (1).
NOTE
Return
130C
Grader
to
original
equipment condition.
End of Task
Figure 7-115
Figure 7-119
Figure 7-118
7-198