TM 5-3805-261-20
STEERING CONTROL CONSOLE SYSTEM MAINTENANCE. (cont)
7-19.
Electrical Monitor System Panel Switches. (Sheet 3 of 3)
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install two terminals (6), lockwashers (5)
and screws (4) on switch (7, Figure 7-35).
NOTE
All connections must be clean and
free of corrosion.
2.
Connect two wire leads (3) to terminals (6).
3.
Install items 7 thru 3 as an assembly,
lockwasher (2) and new lock nut (1) in
electrical monitor system panel (8, Figure 7-
34). Tighten lock nut (1) to 1.5 ft-lb torque.
4.
Install steering console hood. Refer to
paragraph 13-18, step 7.
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 7-35.
Figure 7-34.
End of Task
7-58
