TM 5-3805-261-20
STEERING CONTROL CONSOLE MAINTENANCE.
7-21.
Electrical Monitor System Fault Light. (Sheet 2 of 3)
REMOVAL
1.
Remove steering console hood. Refer to
paragraph 13-18, step 1.
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
2.
Disconnect two wire assemblies (1) from
rear on panel (10, Figure 7-37) of steering
control console.
3.
Remove lock nut (2), washer (3) and items
4 thru 9 as an assembly from rear of panel
(10).
4.
Remove lens (5) and lamp (6) from lamp
base (4).
5.
Remove two screws (7), lockwashers (8)
and terminals (9).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-37.
Go to Sheet 3
7-63
