TM 5-3805-261-20
STEERING CONTROL CONSOLE MAINTENANCE. (cont)
7-20.
Electrical Monitor System Function Lights. (Sheet 2 of 3)
REMOVAL
NOTE
The
following
is
a
maintenance
procedure for one function light. The
maintenance
procedure
for
the
remaining function lights is identical.
1.
Remove steering console hood. Refer to
paragraph 13-18, step 1.
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
2.
Disconnect wire assembly (1, Figure 7-36)
from electrical monitor system panel (4).
3.
Remove miniature lamp (2).
4.
Remove lamp housing (3) from electrical
monitor system panel (4).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 7-36.
Go to Sheet 3
7-60
