TM 5-3805-261-20
STEERING CONTROL CONSOLE MAINTENANCE. (cont)
7-18.
Electrical Monitor System Panel. (Sheet 2 of
3)
REMOVAL
1.
Remove steering console hood. Refer to
paragraph 13-18, step 1.
NOTE
All
wire,
cable
and
harness
assemblies must be tagged before
disconnecting to aid in installation.
2.
Disconnect harness assembly (1, Figure 7-
32) from steering control console. Unscrew
connector. Pull to separate.
3.
Remove nut (2) and wire assembly (3).
4.
Remove two nuts (4), washers (5) and
bracket (6).
5.
Remove two nuts (7).
6.
Remove two nuts (8), washers (9) and
bracket (10).
7.
Remove two nuts (11) and bracket (12).
NOTE
Remove electrical monitor system
panel and film only if inspection
indicates replacement is necessary.
8.
Remove electrical monitor system panel
(13), if necessary.
9.
Remove film (14), if necessary.
Figure 7-32.
Go to Sheet 3
7-54
