TM 5-3805-261-20
STEERING CONTROL CONSOLE MAINTENANCE.
7-18.
Electrical Monitor System Panel. (Sheet 3 of
3)
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Apply film (14) to electrical monitor system
panel (13, Figure 7-33), if removed.
2.
Position electrical monitor system panel
(13) in steering control console, if removed.
3.
Install bracket (12) and two nuts (11).
4.
Install bracket (10), two washers (9) and
nuts (8).
5.
Install two nuts (7).
6.
Install bracket (6), two washers (5) and nuts
(4).
7.
Install wire assembly (3) and nut (2).
8.
Connect harness assembly (1). Tighten
connector to 12 ft-lb torque.
9.
Install steering console hood. Refer to
paragraph 13-18, step 7.
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 7-33.
End of Task
7-55
