INSTALLATION - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
216

TM 5-3805-261-20 COOLING SYSTEM MAINTENANCE. (cont) 6-36. Radiator and Support. (Sheet 7 of 8) INSTALLATION (cont) 7. Position four mounts (21) and brackets (20, Figure 6-87). 8. Install eight washers (19) and bolts (18). Do not tighten bolts (18). 9. Install four washers (17 and 16), bolts (15) and mounts (21) and secure to brackets (20). 10. Tighten eight bolts (18). 11. Install baffle (33). 12. Install hoist and sling. Attach sling to left and right side of grabirons (Figure 6-86). 13. Lift items 28 thru 18 as an assembly and slowly stand on end with hoist and sling and set into position. 14. Install hose (1). 15. Install ten washers (14) and bolts (13). 16. Position tube (12, Figure 6-85) on top of fuel tank. 17. Install hose (11) on tube (12). 18. Position two clamps (10 and 8). 19. Install clamp (31), washer (30) and bolt (29) on tube (12) and fuel tank (32). 20. Install hose (9) at tube (12) and temperature regulator housing. 21. Install two clamps (10 and 8). Figure 6-87. Figure 6-86. Figure 6-85. Go to Sheet 8 6-124

Privacy Statement
Press Release
Contact