TM 5-3805-261-20
COOLING SYSTEM MAINTENANCE.
6-36.
Radiator and Support. (Sheet 4 of 8)
REMOVAL
WARNING
Weight
of
radiator
and
support
assembly is approximately 310 lbs.
Use adequate hoist and sling. Failure
to follow this procedure may cause
INJURY. If you are injured, seek
medical aid immediately.
9.
Attach hoist and sling to grabirons (Figure
6-86) and take up slack.
10.
Remove ten bolts (13) and washers (14).
11.
Using a hoist and sling, remove items 18
thru 28 as an assembly.
12.
Remove baffle (33) (see Figure 6-95).
13.
Remove four bolts (15) and washers (16
and 17).
14.
Remove eight bolts (18), washers (19), four
brackets (20) and mounts (21) from sides of
support (22). Discard mounts (21) if
cracked, broken, distorted or deteriorated.
15.
Place radiator in upright position.
16.
Remove hoist and sling.
17.
Install four link brackets, 3/8-16 x 5-1/2 inch
bolts, 3/8-16 inch nuts and hoist and sling
(Figure 6-88).
Figure 6-87.
Figure 6-88.
Go to Sheet 5
6-121
Figure 6-86.
